Passer au contenu de la page Passer à la navigation Passer au pied de page
TIMBERSLED
CENTRE D'AIDE
03/11/2024

Fitment Tables

Fitment Tables come with every install kit for Mountain Horse, ARO, RIOT and Ripper.

Learn more about install kits

Fitment tables are used to determine which spindle spacers, strut rod spacers and sub frame spacers are required for installation on your specific make and model of bike. The Fitment Tables are helpful when you need to order replacement spacers. For example, if you have lost or damaged spacers that need to be replaced, or if you have upgraded bikes and want to install your Timbersled system on your new bike.

Watch the following video for additional information on fitment tables. 

Fitment Tables also show the recommended counter shaft sprocket for your application. If your bike does not currently have the recommended counter shaft sprocket, see your bike dealer. 

On all Fitment Tables you will see five digit part numbers for individual parts. These cannot be ordered individually. Spacers come in packs as seen in the example below. To order the spacers you need, order the seven digit part number of the pack that contains those spacers.

Fitment Table Example

Notes:

  • "Left" and "Right" spacers are oriented as you're sitting on the bike.
  • Cell colors in the fitment table correspond to the color of the part. Some spacers are colored, or have the part number stamped on them.
  • Additional counter shaft sprockets can be obtained from your bike manufacturer or dealer.

Fitment tables can be found on our website and are also listed individually below:

ST RIPPER
Beta® - MOUNTAIN HORSE
Beta® - ARO or RIOT 
GasGas® - MOUNTAIN HORSE
GasGas® - ARO or RIOT
Honda® - MOUNTAIN HORSE
Honda® - ARO or RIOT
Husqvarna® - MOUNTAIN HORSE
Husqvarna® - ARO or RIOT
Kawasaki® - MOUNTAIN HORSE
Kawasaki® - ARO or RIOT
KTM® - MOUNTAIN HORSE
KTM® - ARO or RIOT
Sherco® - ARO or RIOT
Suzuki® - MOUNTAIN HORSE
Suzuki® - ARO or RIOT
Yamaha® - MOUNTAIN HORSE
Yamaha® - ARO or RIOT

Beta® is a registered trademark of the Betamotor S.p.A. Company.
Honda® is a registered trademark of Honda Motor Company, Ltd.
Husqvarna® is registered to Husqvarna Aktiebolag.
Kawasaki® is a registered trademark of Kawasaki Heavy Industries, Ltd.
KTM ® and GasGas® are registered trademarks  of KTM AG Public limited company Australia
Suzuki® is a registered trademark of Suzuki Motor Corporation.
Yamaha® is a registered trademark of Yamaha Hatsudoki Kabushiki Kaisha.
Sherco® is a registered trademark of FITES SAS COMPANY FRANCE
YouTube® is a registered trademark of Google LLC

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.

Mots-clés fit , fitment , table , spacer , sprocket , install , part , kit ,