Lightweight Products 

That Improve Mountain Performance 

To Order by Phone call (208) 255-5644  

~ We accept payment thru PayPal  ~ We ship via UPS & US Mail ~

Yamaha FX Nytro & Phazer Parts

Nytro Boonie Bumper (08-09)

• Provides maximum protection to the front of your sled

• Attractive look not found on any other OEM or aftermarket bumper

• Direct bolt on kit

• Constructed of tig welded 4130 chrome molly

• Kit provides 1” more travel

• Skid Plate included

• Bumper is 1 ½ lbs heavier then stock

• Colors:  White, Black, Blue, Red

Mtn Tamer Back Suspension Kit for Mtn. FX Nytro (08-09)

• Kit Saves 38 lbs.  (suspension saves 30, brackets save 8)

• Complete suspension weighs 36 lbs.  

• Kit Includes our Lightweight drop bracket kit

• Kit provides 1” more travel

• Sled sits with a 2” lift at the back bumper

• Suspension bolts into the stock bolt holes

• Colors:  Black, Blue, Red

• Optional slide-rails available for 144”, 153”, 162”, 174”  track lengths

Barkbuster Front-End Kit for FX Phazer (07-09)

• Saves 9 lbs.

• Turns 12 Degrees Sharper

• 39” variable ski stance  

• 18 degrees spindle caster

Kit Includes: A-arms, spindles, 4 ball joints, 8 aluminum mounting collars & mounting hardware (kit will adapt sway bar).

Barkbuster Front-End Kit for FX Nytro (08-09)

• Saves 9 lbs.

• Turns 12 Degrees Sharper

• 39” variable ski stance  

• 18 degrees spindle caster

Kit Includes: A-arms, spindles, 4 ball joints, 8 aluminum mounting collars & mounting hardware (kit will adapt sway bar).

Venting Kit for FX Phazer (07 & newer)

• 4 Screen Kit (2 L-side screens & 2 R-side screen)

• Reduces under hood height by 30 degrees

• Allows air to enter in through the shock tower & exit out the back

• Screens sit low on the body so air will pass through the clutch & exhaust compartment

• Venting holes must be cut out

• Screens are black powder coated

• Kit includes self mushrooming aluminum rivets

$125.00   ($14.00 S&H)

Venting Kit for FX Nytro (08 sleds only)

• 4 Screen Kit (2 L-side screens & 2 R-side screen)

• Reduces under hood height by 30 degrees

• Allows air to enter in through the shock tower & exit out the back

• Screens sit low on the body so air will pass through the clutch & exhaust compartment

• Venting holes must be cut out

• Screens are black powder coated

• Kit includes self mushrooming aluminum rivets

$125.00   ($14.00 S&H)

Lightweight Drop Bracket Kit for FX Nytro

• Saves 8 lbs.

• Direct bolt on kit

• Built from 6061 T-6 aluminum

• Polished to give a custom look

$150.00   ($14.00 S&H)

Yamaha Apex, Vector & RX-1 Parts

Mtn Tamer Back Suspension Kit for Mtn. Apex, Vector (06-09)

• Kit Saves 30 lbs.

• Complete suspension weighs 36 lbs.

• Kit provides 1 ½” more travel at the back suspension arm

• Sled sits with a 2” lift at the back bumper

• Suspension bolts into the stock bolt holes
• Colors: Black, Blue, Red

• Optional slide-rails available for 144”, 153”, 162”, 174”  track lengths

Barkbuster Lightweight Front End Kits  

for Mtn. RX-1, Apex, Vector

• Saves 12 lbs.

• Turns 10 Degrees Sharper

• 39 ½” or 42 ½" variable ski stance  

• 18 degrees spindle caster

Kit Includes: A-arms, spindles, 4 ball joints, tie rods & mounting hardware (kit will adapt sway bar).

Apex Venting Kit (06 & newer)

• 4 Screen Kit (2 L-side screens & 2 R-side screen)

• Reduces under hood height by 30 degrees

• Allows air to enter in through the shock tower & exit out the back

• Screens sit low on the body so air will pass through the clutch & exhaust compartment

• Venting holes must be cut out

• Screens are black powder coated

• Kit includes self mushrooming aluminum rivets

($14.00 S&H)

Sway Bar Removal Plates

Handlebar Mounting Brackets for Stock Tachometers

• Intended use for sleds that have aftermarket hoods

• Puts tachometer up high so that it is easy to see

Mtn. APEX & Vector Lightweight Drop Bracket Kit

• Saves 6 ½ lbs.

• Direct bolt on kit

• Built from 6061 T-6 aluminum

• Polished to give a custom look

Yamaha Mtn. Max & Viper Parts

Barkbuster Lightweight Front End Kits

• Saves 14 lbs.

• Turns 10 Degrees Sharper

• 39” ski stance  

• 20 degrees spindle caster

Kit Includes: A-arms, spindles, 4 ball joints, tie rods, 4 cross-shaves, & mounting hardware (kit will adapt sway bar).

Sway Bar Removal Plates