Lightweight Products 

That Improve Mountain Performance 

To Order by Phone call (208) 255-5644  

~ We accept payment thru PayPal  ~ We ship via UPS & US Mail ~

Ski-Doo Rev-XP Parts

Mtn Tamer Back Suspension Kit REV-XP (08 & newer)

• Kit Saves 15 lbs.

• Kit includes slide rails that fit 146",  154", 163", or 174" track lengths

• Complete suspension weighs 36 lbs.

• Kit provides 1” more travel at the back suspension arm

• Sled sits with a 1” lift at the back bumper

• Suspension bolts into the stock bolt holes
• Colors: Black, Yellow, Red, Blue

(Kit breakdown: Mtn Tamer kit $1550.00 / Rail kit $450.00)

Barkbuster Lightweight Front End Kit for REV-XP

• Kit saves 7  lbs

• Turn 10 degrees sharper

• 39” ski stance  

• 18 degrees spindle caster

Kit Includes: A-arms, spindles, steering arms, 4 boll joints, needed hardware to install and has a 39 inch ski stance (kit will accept the sway bar).

Pictures Coming Soon

Clean Air Intake System for REV-XP 800

Kit Includes: Intake pod cover, 2 snow-cone air filters, 2 pre-filters, headlight mounting bracket, 2 side panel screens.

• Saves 4 ½ lbs

• Adds 4 HP

• Draws in outside air

• Improves throttle response and top end power

• Free up under the hood space, allowing more air movement to cool the clutches & belt

• Properly mounts both intake sensors

• Kit is simple to install

• No re-jetting required

S/D REV-XP 800

REV-XP Venting Kit (08 only)

• 4 Screen Kit (2 L-side screens & 2 R-side screen)

• Reduces under hood height by 30 degrees

• Allows air to enter in through the shock tower & exit out the back

• Screens sit low on the body so air will pass through the clutch & exhaust compartment

• Venting holes must be cut out

• Screens are black powder coated

• Kit includes self mushrooming aluminum rivets

($14.00 S&H)

Ski-Doo Rev Parts

Mtn Tamer Back Suspension Kit REV (2003 & Newer)

• Kit Saves (20 lbs. on 04-05) ( 17 lbs. on 06-07)

• Complete suspension weighs 36 lbs.

• Kit provides 1 ½” more travel at the back suspension arm

• Sled sits with a 2” lift at the back bumper

• Suspension bolts into the stock bolt holes
• Colors: Black, Yellow

• Optional slide-rails available for 144”, 151”, 162”, 174”  track lengths

Barkbuster Lightweight Front End Kit for REV

• Kit saves 9 ½  lbs

• Turn 11 degrees sharper

• 39 ½” ski stance  

• 20 degrees spindle caster

Kit Includes: A-arms, spindles, steering arms, 4 boll joints, needed hardware to in install and has 

a 39 ½ inch ski stance (kit will accept the sway bar).

Sway Bar Removal Plates

Clean Air Intake System for REV 600, 800 with DPM

Kit Includes: Intake pod cover, 2 snow-cone air filters, needed side panel screens.

• Saves 4 lbs

• Adds 4 HP

• Improves throttle response and top end power

• Free up under the hood space, allowing more air movement to cool the clutches

• Properly mounts intake sensors

• Kit is simple to install

• No re-jetting or remapping required

S/D REV 6 & 8 with DPM

Clean Air Intake System for RT 1000 with SDI

Kit Includes: Intake pod cover, 2 snow-cone air filters, needed side panel screens.

• Saves 4 lbs

• Adds 4 HP

• Improves throttle response and top end power

• Free up under the hood space, allowing more air movement to cool the clutches

• Properly mounts intake sensors

• Kit is simple to install

• No re-jetting or remapping required

S/D RT 1000 with SDi

REV Venting Kit (03-07, all models)

• 4 Screen Kit (2 L-side screens & 2 R-side screen)

• Reduces under hood height by 30 degrees

• Allows air to enter in through the shock tower & exit out the back

• Screens sit low on the body so air will pass through the clutch & exhaust compartment

• Venting holes must be cut out

• Screens are black powder coated

• Kit includes self mushrooming aluminum rivets

($14.00 S&H)

Ski-Doo ZX Parts

Barkbuster Lightweight Front End Kits for ZX

• Kit save 11 lbs

• Turns 8 Degrees Sharper

• 38 ½” ski stance  

• 20 degrees spindle caster

Sway Bar Removal Plates