Lightweight Products 

That Improve Mountain Performance 

To Order by Phone call (208) 255-5644  

~ We accept payment thru PayPal  ~ We ship via UPS & US Mail ~

Polaris IQ RMK Parts

Mtn Tamer Back Suspension Kit

• Kit Saves ( 19 lbs. on 02-06) (16 lbs. on 07-09)

• Complete suspension weighs 37 lbs.

• Sled sits at the stock ride height

• Suspension bolts into the stock bolt holes

• Slide Rails are required for 09 sleds

• Colors: Black, Red

• Optional slide-rails available for 144”, 154”, 163”, 174”  track lengths

Barkbuster Lightweight Front End Kit

• Kit saves 9 lbs

• Turn 13 degrees sharper

• 40 ½” ski stance  

• 18 degrees spindle caster

Sway Bar Removal Plates

Clean Air Intake System IQ 700 & 900 RMK, Switchback, Fusion

Kit Includes: Intake manifold, snow-con air filter, pre-filter, & clutch cover.

• Kit will save 7 1/2 lbs.

• Does not require that you remove the front radiator

• Increases air flow, giving the engine a crisper midrange

• Free up under the hood space, allowing more air movement to cool the clutches

• Kit is simple to install  

• Does not require any remapping of the fuel system

Clean Air Intake System 07-08 IQ 600, 700 & 800 RMK & Switchback

Kit Includes: Intake manifold, snow-con air filter, pre-filter, & clutch cover.

• Adds 4 HP

• Increases air flow, giving the engine a crisper midrange

• Kit is simple to install  

• Does not require any re-jetting or remapping of the fuel system

IQ Hot Air Venting Kit (RMK & Switchback 05 & newer)

• 4 Screen Kit (2 L-side screens & 2 R-side screen)

• Reduces under hood height by 30 degrees

• Allows air to enter in through the shock tower & exit out the back

• Screens sit low on the body so air will pass through the clutch & exhaust compartment

• Venting holes must be cut out

• Screens are black powder coated

• Kit includes self mushrooming aluminum rivets

($14.00 S&H)

IQ Back Panel Vent, (RMK & Switchback 07 & newer)

• 2 Screen Kit (1 L-side screen & 1 R-side screen)

• Helps to dissipate clutch & exhaust heat

• Venting holes must be cut out

• Screens are black powder coated

• Kit includes self mushrooming aluminum rivets

($8.00 S&H)

IQ Hood Air Intake Vents (05 & newer all models)

• Intended use for sleds with aftermarket intake systems

• 2 Screen Kit (1 L-side screen & 1 R-side screen)

• Provides 100% better heat dissipation then stock pre-filters

• Screens fit into existing holes

• Screens are black powder coated

• Kit includes self mushrooming aluminum rivets

($8.00 S&H)

IQ Side Compartment Door Vents (05- 06 sleds only)

• 2 Screen Kit (1 L-side screen & 1 R-side screen)  

• Helps to dissipate clutch & exhaust heat

• Screens fit into existing holes
• Must Remove Plastic Compartment

• Screens are black powder coated

• Kit includes self mushrooming aluminum rivets

RMK & Switchback

Fusion

Handlebar Mounting Brackets for Stock Tachometers

• Intended for use on sleds that have aftermarket hoods

• Puts tachometer up high so that it is easier to see
• Polaris IQ chassis 05 & newer

Rider Select Elimination Kit for 05 Models

• Saves 1 lbs.

• Stronger and more rigid

• Column will set in # 5 ½ position

• Column bushing is grease-able

Polaris Edge RMK Parts

Mtn Tamer Back Suspension Kit

• Saves 20 lbs.

• Complete suspension weighs 38 lbs.

• Sled sits at the stock ride height  

• Suspension bolts into stock bolt holes

• Colors: Black, Red

Barkbuster Lightweight Front End kits for 

Edge RMK & Escape

• Saves 12 lbs on Edge RMK & 9 lbs on Escape

• Turns 10 Degrees Sharper

• 41” ski stance  

• 20 degree spindle caster

Sway Bar Removal Plates

Handlebar Mounting Brackets for Stock Tachometers

• Intended for use on sleds that have aftermarket hoods

• Puts tachometer up high so that it is easier to see
• Polaris & Arctic Cat with 4 ½” tach

Chain Case Guard for Edge

Guard is designed to protect the chain case if you have your chain case rolled down below the bottom of the sled. This guard is also the right side trailing arm mount; it is all one piece and is extremely strong. Built of .125 aluminum on the bottom and .250 on the side for maximum durability and support for trailing arms. Comes polished to a mirror finish to give it an eye-caching look!

Polaris Indy & Gen-2 RMK Parts

Barkbuster Lightweight Front End kits

• Kit save 12 lbs

• Turns 10 Degrees Sharper 

• 38 ½” ski stance

• 20 degrees spindle caster  

Kit Includes: Trailing arms, spindles, steering arms, radius rods, and outer rod ends (kits do not accept the sway bar).

Sway Bar Removal Plates

Clean Air Intake System for Indy & Gen-2

 Kit Includes: Intake pod cover, 2 snow-cone air filters, needed hardware.

• Saves 3 lbs

• Improves throttle response and top end power

• Free up under the hood space

• Kit is simple to install

• No re-jetting required

97-99, 600 & 700

00-01, 6, 7 & 800

Handlebar Mounting Brackets for Stock Tachometers

• Intended for use on sleds that have aftermarket hoods

• Puts tachometer up high so that it is easier to see
• Polaris & Arctic Cat with 4 ½” tach

Chain Case Guard for Gen-2

Guard is designed to protect the chain case if you have your chain case rolled down below the bottom of the sled. This guard is also the right side trailing arm mount; it is all one piece and is extremely strong. Built of .125 aluminum on the bottom and .250 on the side for maximum durability and support for trailing arms. Comes polished to a mirror finish to give it an eye-catching look!