Drop Brackets
The Pro sleds are very weak around the drop bracket where the brackets are riveted to the tunnel. The gussets provide strength to the side of the tunnel and prevent bending of the tunnel around this area.
- Ties the drop bracket, tunnel and gusset all together and spreads out the load to a larger area
- Self aligns in factory rivet holes
- Gusset will rivet over the factory self-piercing rivets that attach the drop bracket to the tunnel, so no need to fight the removal of them.
- Constructed of .100 thick 6061 aluminum
- Black powder coated to resist snow freezing
- Includes all hardware needed to install
- Provides an optional bolt hole that will give a 1 1/2" lift at the back bumper
- Brackets have superior strength in comparison to the OEM brackets
- Fits the OEM suspension or the Mtn.Tamer suspension
- Built from 6061 T-6 aluminum
- Bolts and Rivets included
- Saves 3.5 lbs.
- Direct Bolt on Kits
- Brackets have the stock amount of drop
- Made of 6061 T-6 Aluminum
- Bolts & Rivets Included
- Saves 8 lbs.
- Direct Bolt on Kits
- Brackets have the stock amount of drop
- Made of 6061 T-6 Aluminum
- Bolts & Rivets Included
- Saves 6 lbs.
- Direct Bolt on Kits
- Brackets have the stock amount of drop
- Made of 6061 T-6 Aluminum
- Bolts & Rivets Included
- Increases tunnel height & Track to tunnel clearance
- Universal application
- Made of 6061 T-6 Aluminum
- Pop rivets included
- Drop amount is drop below running board
- Bolts onto the OEM drop bracket
- Provides a 1" to 2" drop down to fit a deeper lug track
- 4" wide X 5 1/4" tall X 3/16" thick
- Very simple to install
- Will fit any sled using a 15" or 16" wide track
- Bolts and rivets included
- Reinforces the tunnel where the suspension bolts in on the front
- Reinforces the running board
- Pop rivets included
- Includes 2 optional drill hole locations at 3/4" & 1 3/4" from bottom of running board